KM-30S DOOR CONTROLLER CARD

Door Controller Card with Motor

Door Control Board for 220 VAC Synchronous Motor Telescopic Lift Doors

Door fully open / fully closed

Door jam or photocell active output

Relay contact output. For 3A, 250VAC or 30VDC

Door open / close signal

Slow signal / fast signal

Photocell signal

Ground signal

KM-30S door card is suitable for use on fire lift doors

With slow speed signal input, the photocell signal is blocked in long time photocell cutting and the doors are closed at slow speed (Nudging mode)

Door speed, door position and operating status in normal operation, and error in case of normal operation

Input Supply Voltage -> 220 VAC ± %10

Feed Protection -> Fuse Protected (2A)

Standard Interface -> 2 Rows, 16 Character LCD Screen, 4-Button Set, Optional External LCD Interface

Dimensions (mm) -> Without Box: 275 x 105 x 21 (Width x Height x Height) With Box: 310 x 112,6 x 30 (W x L x W)

Motor Voltage -> 220 VAC

Language Options -> Turkish and English

Audible Warning -> With the Buzzer

Other -> 1 Spare Input

Serious and Irregular -> The advanced software softens the S in the navigation ramps and permits smooth but smooth movements of the door movements with no limit switch-free algorithm

No Limit Switch Required -> The door operator does not need a limit switch for operation. Door width, door open-close positions are detected automatically

Possible Door Jam -> When the door is jammed, the buzzer is turned back on. The jamming is passed slowly through the perceived zone to prevent damage to the passengers and the door

Delegation -> In terms of security, necessary needs and ease of setup, access to the menu has been authorized. Different levels of authority have been assigned to access the menu: producer level, basic level and restricted level

Wide Parameter Capability -> For manufacturers, parameters such as motor reduction ratio, engine revolutions, drive pulley circumference, spoon opening zone, etc. can be entered for application flexibility

User Settings -> For user settings, defined speed settings in centimeters per second and defined ramp paths in centimeters can be specified

Counter Support -> Operation of the door can be monitored by the on/off counter

Various Output Signals -> The door can be fully opened, completely closed, and can output jammed output signals to operate the control panels fully integrated

Keyboard -> All system parameters can be adjusted using the KM-30S keypad

Reduction Option -> 220V BLDC control with or without door gear reducer

Engine Type Max. 200W

Engine Output Power 0,65 A (Nominal)

Motor Control Shape Vector Control

Engine Protection Overloading and Short Circuit Protection

Encoder Type 3 Channel Incremental Encoder

Encoder Voltage 5 VDC

Resolution 100-2048 pals Model

Door Width 50 - 300 cm

Door Speed 20 cm/sn – 99 cm/sn

Door Speed (Slow) 5 cm/sn – 30 cm/sn